蚂蚁矿机T19 Pro Hyd 235T BITMAIN Antminer T19 Pro Hyd 235T MINER

 提示:点击图片可以放大
蚂蚁T19 Pro Hyd 235T水冷矿机,算力足够,功耗5412瓦,适合380V三相电使用,工业用电专用矿机,家里的220v用不了。
蚂蚁矿机T19 PRO HYD 235T水冷矿机
蚂蚁矿机T19 Pro Hyd 235T
 

购买方式
联系客服咨询购买


付款方式
USDT(ERC20/TRC20)

详细特征
电源供应
电源交流输入电压,伏特(2-1):380~415
电源交流输入频率范围,Hz :50~60
电源交流输入电流,安培(2-2):12
 
硬件配置
网络连接方式:RJ45以太网10/100M
矿机尺寸(长*宽*高,无包装),mm :410*170*209
矿机尺寸(长*宽*高,带包装),mm :570*316*430
净重,千克:12.8
毛重,kg :14.1
 
环境要求
进水温度,°C(2-3):20~50
水流量,L/min :8.0~10.0
水压,:bar≤3.5
工作液(2-4):防冻液/去离子水/纯水
液体PH值:8.5~9.5
水管接头直径,mm: DN10
储存温度,°C:-20~70
工作湿度(非冷凝),相对湿度:10%~90%
注:
 
(1-1)哈希率值、墙上的功率和墙上的功率效率都是典型值。实际算力值波动±3%,实际墙上功率和墙上功率效率波动±5%。
(1-2)进水温度。
(2-1)注意:输入电压错误可能会导致服务器损坏。
(2-2)三相交流输入,最大12A。
(2-3)如果进水温度低于20°C,则无法启动矿机。对于外部干式冷却器(EC2-DT),
•如果出水温度为35°C,则最高环境温度为30°C;
•如果出水温度为45°C,则最高环境温度为40°C;
•如果出水温度为50°C,则最高环境温度为45°C。
(2-4)如果水的电导率≥100μs/cm,则必须更换液体。系统首次运行时,水的电导率小于20μs/cm。


|采购指南
 
1.对于BITMAIN已收到全额付款的订单,将按先付款后发货的原则安排发货。
 
2.您对因缺乏适当文件而导致的任何海关延误或退货负责。强烈建议您了解当地的清关政策,并提前准备所有海关文件,以避免延误或意外成本。
 
3.点击此处下载合格证书,并查找有关BITMAIN产品清关的更多信息。
 
 
|保修
 
1.请注意,如果由于操作问题,矿机在没有水冷容器的情况下运行,则无法提供产品的客户服务。
 
2.自发货之日起提供365天保修期。BITMAIN将承担在保修期内运输替换设备的运费。
 
3.保修仅适用于直接从BITMAIN购买机器的原始购买者。一旦矿工被转售,保修范围就成为转售商的责任。
 
4.如果用户未按照提供的说明、规格和条件使用产品,或未经BITMAIN事先同意更改设备的功能设置,BITMAIN将不对由此造成的任何损害承担责任。
 
5.点击此处查看适用于所有订单的条款和条件的完整列表https://shop.bitmain.com.
 

关于比特大陆
我们的愿景是创造一个更美好的数字世界。
自2013年成立以来,BITMAIN通过其品牌ANTMINER成为世界领先的数字货币挖矿服务器制造商,ANTMINER长期以来一直保持着全球市场份额和技术领先地位,为100多个国家和地区的客户提供服务。该公司的研发中心位于新加坡,在全球拥有多家分公司和子公司,包括但不限于香港、美国、马来西亚、哈萨克斯坦、阿拉伯联合酋长国、立陶宛和巴拉圭。
秉承“创造更美好的数字世界”的核心愿景,BITMAIN不仅与全球客户群建立了互利、持久、可持续的关系,还提供了卓越的哈希率效率技术。这些技术构成了安全稳定的哈希率基础设施和全面解决方案的支柱,从而为web 3.0时代的持续创新和发展做出了贡献。

 
Purchase method
Contact customer service for consultation and purchase

Payment Method
USDT(ERC20/TRC20)
 
Detailed Characteristics
Power supply
Power supply AC input voltage, Volt(2-1) :380~415
Power supply AC input frequency range, Hz :50~60
Power supply AC input current, Amp(2-2) :12
 
Hardware configuration
Network connection mode RJ45 Ethernet: 10/100M
Miner size (length*width*height, w/o package),mm :410*170*209
Miner size (length*width*height, with package),mm :570*316*430
Net weight, kg :12.8
Gross weight, kg :14.1
 
Environment requirements
Inlet water temperature, °C(2-3): 20~50
Water flow, L/min :8.0~10.0
Water pressure, bar :≤3.5
Working fluid(2-4) Antifreeze/ Deionized water/ Pure water
Liquid PH :8.5~9.5
Diameter of water pipe connector, mm :DN10
Storage temperature, °C: -20~70
Operation humidity(non-condensing), RH :10%~90%
NOTE:
 
(1-1) The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual Power on wall and Power efficiency on wall fluctuate by ±5%.
(1-2) Inlet water temperature.
(2-1) Caution: Wrong input voltage may cause server damaged.
(2-2) Three-phase AC input, 12A max.
(2-3) If the inlet water temperature is lower than 20 °C, the miner cannot be started. For the external dry cooler (EC2-DT),
• if the outlet water temperature is 35°C, the maximum ambient temperature is 30°C;
• if the outlet water temperature is 45°C, the maximum ambient temperature is 40°C;
• if the outlet water temperature is 50°C, the maximum ambient temperature is 45°C.
(2-4) If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.


| Purchasing Guidelines
 
1. Shipments will be scheduled on a first-paid-first-ship basis for orders on which BITMAIN has received full payment.
 
2. You are responsible for any customs delays or returned shipments due to a lack of proper documentation. It's highly recommended to be aware of local customs clearance policies and prepare all customs documentation ahead of time to avoid delays or unexpected costs.
 
3. Click here to download Certificates of Conformity and find additional information on customs clearance for BITMAIN products.
 
 
| Warranty
 
1. Kindly note that customer service for the product shall not be available if the miner is operated without the water-cooling container due to operational issues.
 
2. A 365-day warranty period is provided starting from the shipping date. BITMAIN will cover shipping costs when shipping a replacement unit within the warranty period.
 
3. The warranty only applies to the original purchaser who purchased the machine directly from BITMAIN. Once the miner is resold, warranty coverage becomes the responsibility of the re-seller.
 
4. If the user fails to use the product per the given instructions, specifications, and conditions provided or changes the function settings of the unit without BITMAIN's prior consent, BITMAIN will not be liable for any damage arising therefrom.
 
5. Click here for a complete list of the Terms & Conditions that apply to all orders placed on https://shop.bitmain.com.


About BITMAIN
 
Our vision is to create a better digital world.
 
Since its foundation in 2013, BITMAIN is the world's leading manufacturer of digital currency mining servers through its brand ANTMINER, which has long maintained a global market share and leading position in technology, serving customers across over 100 countries and regions. The company's R&D center is situated in Singapore, and it has multiple branches and subsidiaries across the globe, including but not limited to Hong Kong, the United States, Malaysia, Kazakhstan, the United Arab Emirates, Lithuania, and Paraguay.
 
Adhering to the core vision of 'creating a better digital world', BITMAIN not only cultivates mutually beneficial, long-lasting, sustainable relationships with a global customer base, but also provides superior hash-rate efficiency technologies. These technologies form the backbone of secure and stable hashrate infrastructure and comprehensive solutions, thereby contributing to the ongoing innovation and development of the web 3.0 era.

更多>>蚂蚁矿机
产品规格
 
产品概览
T19 Pro Hyd。
算法|加密货币:SHA256|BTC/BCH/BSV
典型哈希率,TH/s(1-1):246
35°C时墙上的电源(1-2),瓦特(1-1):5412W
35°C时墙上的功率效率(1-2),J/TH(1-1):22

Specifications
 
Product Glance
Model T19 Pro Hyd.
Algorithm | Cryptocurrency: SHA256 | BTC/BCH/BSV
Typical Hashrate, TH/s(1-1): 246
Power on wall @35°C(1-2), Watt(1-1) :5412
Power efficiency on wall @35°C(1-2), J/TH(1-1): 22